Case erector

What the "Case erector" can do for you

Fully erects a variety of case sizes and changes over with a simple touch of a button.

How the "Case erector" works

Unopened blanks are stored in 5' long magazine. Prior to being picked by the magazine, the blank is positively separated from the rest with a unique double-stripping mechanism. The blank is then opened and transported through the flap folding stations. Lastly, the case is taken through a taping or hotmelt glue area where it is discharged, squared and sealed!

Our case erector is the only commercially available, stand-alone unit available with a standard automatic changeover, allowing case sizes to be stored in the PLC. The case erector was designed with only three adjustments for the full range of case sizes. Each adjustment is motorized and is automated through the PLC using encoders for positioning. For each case size, the adjustments are stored in a separate recipe. With a simple touch of the button, the erector changes to the case size specified by the operator!

Optional units for added versatility
A re-usable case erector is a simple and reliable design. Cases are stacked on top of one another with each case blank in a horizontal orientation. An overhead vacuum unit lifts the top case to an unfolded hanging position. The top major flap is folded in first, followed by the simultaneous folding of the minor flaps. Finally, the bottom, major flap is pushed until the self-locking tab snaps into place. After this, the case is moved to its proper loading orientation. The reusable case erector can be purchased as a stand-alone unit or integrated into a BluePrint Automation case packer.

Saves Labor
Provides 100% Consistency in Changeover
Eliminates costly “tune-in” period after each case size change